how to use ccna routing and switching 200 125 pdf

200-125 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

Download 200-125 Dumps Free

Product Description:
Exam Number/Code: 200-125
Exam name: CCNA Cisco Certified Network Associate CCNA (v3.0)
n questions with full explanations
Certification: Cisco Certification

HOW TO GET 200-125 Exam PDF Collection Free?

Master the ccna routing and switching 200 125 pdf CCNA Cisco Certified Network Associate CCNA (v3.0) content and be ready for exam day success quickly with this Examcollection 200 125 ccna book free practice exam. We guarantee it!We make it a reality and give you real ccna 200 125 dumps questions in our Cisco 200 125 ccna v3 0 braindumps.Latest 100% VALID Cisco ccna 200 125 book Exam Questions Dumps at below page. You can use our Cisco ccna 200 125 book braindumps and pass your exam.

P.S. Pinpoint 200-125 forum are available on Google Drive, GET MORE: https://drive.google.com/open?id=1tmPuPMdbI90mJvs8j7thMAwqkALcwK_i


New Cisco 200-125 Exam Dumps Collection (Question 6 - Question 15)

New Questions 6

Which logging command can enable administrators to correlate syslog messages with millisecond precision?

A. no logging console

B. logging buffered 4

C. no logging monitor

D. service timestamps log datetime msec

E. logging host 10.2.0.21

Answer: D


New Questions 7

R1#show running-config interface Loopback0

description ***Loopback***

ip address 192.168.1.1 255.255.255.255

ip ospf 1 area 0

!

interface Ethernet0/0

description **Connected to R1-LAN** ip address 10.10.110.1 255.255.255.0

ip ospf 1 area 0

!

interface Ethernet0/1

description **Connected to L2SW**

ip address 10.10.230.1 255.255.255.0

ip ospf hello-interval 25 ip ospf 1 area 0

!

router ospf 1

log-adjacency-changes

R2# show running-config R2

!

interface Loopback0 description **Loopback**

ip address 192.168.2.2 255.255.255.255

ip ospf 2 area 0

!

interface Ethernet0/0

description **Connected to R2-LAN** ip address 10.10.120.1 255.255.255.0

ip ospf 2 area 0

!

interface Ethernet0/1

description **Connected to L2SW**

ip address 10.10.230.2 255.255.255.0

ip ospf 2 area 0

!

router ospf 2

log-adjacency-changes

R3#show running-config R3

username R6 password CISCO36

!

interface Loopback0 description **Loopback**

ip address 192.168.3.3 255.255.255.255

ip ospf 3 area 0

!

interface Ethernet0/0

description **Connected to L2SW**

ip address 10.10.230.3 255.255.255.0

ip ospf 3 area 0

!

interface Serial1/0

description **Connected to R4-Branch1 office** ip address 10.10.240.1 255.255.255.252

encapsulation ppp ip ospf 3 area 0

!

interface Serial1/1

description **Connected to R5-Branch2 office** ip address 10.10.240.5 255.255.255.252

encapsulation ppp

ip ospf hello-interval 50 ip ospf 3 area 0

!

interface Serial1/2

description **Connected to R6-Branch3 office** ip address 10.10.240.9 255.255.255.252

encapsulation ppp ip ospf 3 area 0

ppp authentication chap

!

router ospf 3

router-id 192.168.3.3

!

R4#show running-config

R4

!

interface Loopback0 description **Loopback**

ip address 192.168.4.4 255.255.255.255

ip ospf 4 area 2

!

interface Ethernet0/0

ip address 172.16.113.1 255.255.255.0

ip ospf 4 area 2

!

interface Serial1/0

description **Connected to R3-Main Branch office** ip address 10.10.240.2 255.255.255.252

encapsulation ppp ip ospf 4 area 2

!

router ospf 4

log-adjacency-changes

R5#show running-config R5

!

interface Loopback0 description **Loopback**

ip address 192.168.5.5 255.255.255.255

ip ospf 5 area 0

!

interface Ethernet0/0

ip address 172.16.114.1 255.255.255.0

ip ospf 5 area 0

!

interface Serial1/0

description **Connected to R3-Main Branch office**

ip address 10.10.240.6 255.255.255.252

encapsulation ppp ip ospf 5 area 0

!

router ospf 5

log-adjacency-changes

R6#show running-config R6

username R3 password CISCO36

!

interface Loopback0 description **Loopback**

ip address 192.168.6.6 255.255.255.255

ip ospf 6 area 0

!

interface Ethernet0/0

ip address 172.16.115.1 255.255.255.0

ip ospf 6 area 0

!

interface Serial1/0

description **Connected to R3-Main Branch office** ip address 10.10.240.10 255.255.255.252

encapsulation ppp ip ospf 6 area 0

ppp authentication chap

!

router ospf 6

router-id 192.168.3.3

!

R1 does not form an OSPF neighbor adjacency with R2. Which option would fix the issue?

A. R1 ethernet0/1 is shutdown. Configure the no shutdown command.

B. R1 ethernet0/1 configured with a non-default OSPF hello interval of 25, configure no ip ospf hello interval 25

C. R2 ethernet0/1 and R3 ethernet0/0 are configured with a non-default OSPF hello interval of 25; configure no ip ospf hello interval 25

D. Enable OSPF for R1 ethernet0/1; configure ip ospf 1 area 0 command under ethernet0/1

Answer: B


New Questions 8

By default, how many MAC addresses are permitted to be learned on a switch port with port security enabled?

A. 8

B. 2

C. 1

D. 0

Answer: C


New Questions 9

How can you disable DTP on a switch port?

A. Configure the switch port as a trunk.

B. Add an interface on the switch to a channel group.

C. Change the operational mode to static access.

D. Change the administrative mode to access.

Answer: A


New Questions 10

Which identification number is valid for an extended ACL?

A. 1

B. 64

C. 99

D. 100

E. 299

F. 1099

Answer: D


New Questions 11

What are two reasons that duplex mismatches can be difficult to diagnose? (Choose two.)

A. The interface displays a connected (up/up) state even when the duplex settings are mismatched.

B. The symptoms of a duplex mismatch may be intermittent.

C. Autonegotiation is disabled.

D. Full-duplex interfaces use CSMA/CD logic, so mismatches may be disguised by collisions.

E. 1-Gbps interfaces are full-duplex by default.

Answer: A,B


New Questions 12

CORRECT TEXTA corporation wants to add security to its network. The requirements are:

u2711 Host C should be able to use a web browser (HTTP) to access the Finance Web Server.

u2711 Other types of access from host C to the Finance Web Server should be blocked.

u2711 All access from hosts in the Core or local LAN to the Finance Web Server should be blocked.

u2711 All hosts in the Core and on local LAN should be able to access the Public Web Server.

You have been tasked to create and apply anumbered access listto a single outbound interface. This access list can contain no more thanthreestatements that meet these requirements.

Access to the router CLI can be gained by clicking on the appropriate host.

u2711 All passwords have been temporarily set to u201cciscou201d.

u2711 The Core connection uses an IP address of 198.18.209.65.

u2711 The computers in the Hosts LAN have been assigned addresses of 192.168.78.1 u2013 192.168.78.254.

u2711 host A 192.168.78.1

u2711 host B 192.168.78.2

u2711 host C 192.168.78.3

u2711 host D 192.168.78.4

u2711 The Finance Web Server has been assigned an address of 172.22.146.17.

u2711 The Public Web Server in the Server LAN has been assigned an address of 172.22.146.18.

Answer:

Please see below explanation part for details answer steps:

Explanation:

We should create an access-list and apply it to the interface that is connected to the Server LAN because it can filter out traffic from both S2 and Core networks. To see which interface this is, use the u201cshow ip int briefu201d command:

From this, we know that the servers are located on the fa0/1 interface, so we will place our numbered access list here in the outbound direction.

Corp1#configure terminal

Our access-list needs to allow host C u2013 192.168125.3 to the Finance Web Server 172.22.109.17 via HTTP (port 80), so our first line is this:

Corp1(config)#access-list 100 permit tcp host 192.168.125.3 host 172.22.109.17 eq 80

Then, our next two instructions are these:

u2711 Other types of access from host C to the Finance Web Server should be blocked.

u2711 All access from hosts in the Core or local LAN to the Finance Web Server should be blocked.

This can be accomplished with one command (which we need to do as our ACL needs to

be no more than 3 lines long), blocking all other access to the finance web server:

Corp1(config)#access-list 100 deny ip any host 172.22.109.17

Our last instruction is to allow all hosts in the Core and on the local LAN access to the Public Web Server (172.22.109.18)

Corp1(config)#access-list 100 permit ip host 172.22.109.18 any Finally, apply this access-list to Fa0/1 interface (outbound direction) Corp1(config)#interface fa0/1

Corp1(config-if)#ip access-group 100 out

Notice: We have to apply the access-list to Fa0/1 interface (not Fa0/0 interface) so that the access-list can filter traffic coming from both the LAN and the Core networks.

To verify, just click on host C to open its web browser. In the address box type http://172.22.109.17 to check if you are allowed to access Finance Web Server or not. If your configuration is correct then you can access it.

Click on other hosts (A, B and D) and check to make sure you canu2019t access Finance Web Server from these hosts. Then, repeat to make sure they can reach the public server at 172.22.109.18. Finally, save the configuration

Corp1(config-if)#end

Corp1#copy running-config startup-config


New Questions 13

Refer to the exhibit.

You have discovered that computers on the 192 168 10 0/24 network can ping their default gateway, but they cannot connect to any resources on a remote network Which reason for the problem is most likely true?

A. The 192.168.12 0/24 network is missing from OSPF

B. The OSPF process ID is incorrect

C. The OSPF area number is incorrect.

D. An ARP table entry is missing for 192.168.10.0.

E. A VLAN number is incorrect for 192.168.10.0.

Answer: A


New Questions 14

Which three statements about DTP are true? (Choose three.)

A. It is enabled by default.

B. It is a universal protocol.

C. It is a proprietary protocol.

D. It is disabled by default.

E. It is a Layer 3-based protocol.

F. It is a Layer 2-based protocol.

Answer: A,C,F


New Questions 15

What is the correct routing match to reach 172.16.1.5/32?

A. 172.16.1.0/26

B. 172.16.1.0/25

C. 172.16.1.0/24

D. the default route

Answer: A


100% Rebirth Cisco 200-125 Questions & Answers shared by Thedumpscentre, Get HERE: http://www.thedumpscentre.com/200-125-dumps/ (New 573 Q&As)


[TRY FREE] BUY 200-125 Full version( pdf+software ):
https://www.exambible.com/200-125-exam/