Why You Need To tk 1 fip-400-201?

400-201 Royal Pack Testengine pdf

100% Actual & Verified — 100% PASS

Unlimited access to the world's largest Dumps library!

Download 400-201 Dumps Free

Product Description:
Exam Number/Code: 400-201
Exam name: CCIE SP Written v4.0
n questions with full explanations
Certification: Cisco Certification

HOW TO GET 400-201 Exam PDF Collection Free?

Want to know Actualtests 400-201 Exam practice test features? Want to lear more about Cisco CCIE SP Written v4.0 certification experience? Study Virtual Cisco 400-201 answers to Renovate 400-201 questions at Actualtests. Gat a success with an absolute guarantee to pass Cisco 400-201 (CCIE SP Written v4.0) test on your first attempt.

2016 Sep 201-400 pozu:

Q21. Which two flexible service mapping features that are used on the ES40 line card can classify traffic into different service instances, in order to consume fewer VLANs? (Choose two.) 

A. CoS 


C. IP precedence 

D. MPLS experimental bit 

E. ToS 

F. EtherType 

Answer: A,F 


Reference: http://www.cisco.com/c/en/us/td/docs/routers/7600/install_config/ES40_config_guide/es40_ sw_config/es40_chap7.html#pgfId-1500091 

Q22. Refer to the exhibit. 

It displays the Router_3 FIB information without any OSPF LSDB optimization. An engineer wants to optimize the OSPF LSDB in accordance with RFC 1587 Considering the following restraints: 

.Router_3 maintains full connectivity 

.Router_2 requires the least configuration 

In order to achieve the OSPF LSDB optimization on Router_3. which Cisco IOS command should the engineer use on Router_2? 

A. area 1 nssa default-information-originate 

B. area n nssa no-summary 

area 1 nssa no-redistribution 

C. area 1 nssa no-redistribution 

area 1 nssa default-information-originate 

D. area 1 nssa no-summary 

E. area 1 nssa no-redistribution 

F. area 1 nssa no-summary 

area 1 nssa default-information-originate 

Answer: F 


Drag and drop the subslot of the SIP-800 card that is used on Cisco CRS routers on the left to the correct PUM ASIC process on the right. 


Q24. Refer the exhibit. Two Autonomous Systems are enabled to support multicast. An engineer wants to set up configuration so that a multicast client at AS 100 can receive multicast traffic from the M-Server at AS 200. However, the RP announcements must be limited within each autonomous system site. Which Cisco IOS configuration achieves this goal? 

A. On both ASBRs Eth0/0 and the no ip pim sparse-mode command. 

B. On both ASBRs add the ip pim send-rp-discovery scope 1 command. 

C. On both RPs add the ip pim send-rp-discovery scope 2 command. 

D. On both ASBRs Eth0/0 add the ip pim bsr-border command. 

E. On both ASBRs Eth0/0 add the ip pim dense-mode command. 

F. On both RPs add the ip pim bsr-border command. 

Answer: D 


http://www.cisco.com/c/en/us/td/docs/ios/12_2/ipmulti/command/reference/fiprmc_r/1rfmult2.html#wp1050039 It filters the BSR message: http://tools.ietf.org/html/rfc5059#section-4.1 

Q25. Which two statements about 10 Gigabit Ethernet WAN PHY mode are true? (Choose two.) 

A. The signal maps to an OC-192c/STM-64c payload. 

B. The nominal speed is 9.95328 Gbps. 

C. It is compatible with Packet Ethernet over SONET. 

D. The signal maps to an OC-768c/STM-256c payload. 

E. It is compatible with Packet over SONET. 

F. The nominal speed is 10.3125 Gbps. 

Answer: A,B 

Explanation: https://en.wikipedia.org/wiki/10_Gigabit_Ethernet 


Up to the immediate present peter electronic br 400-201:

Q26. An engineer is troubleshooting Precision Time Protocol on Cisco ASR 9000 router and noticed the protocol is running in a Multicast mode. Which two results regarding the messages can the engineer expect? (Choose two) 

A. IPTP messages that use unicast messages and those that use multicast messages must be specified. 

B. Announce and Sync messages are sent as multicast messages. 

C. Signaling. Delay-Request and Delay-Response messages are sent as multicast messages 

D. All messages for PTP will be sent as multicast messages 

E. Announce and Sync messages are sent as unicast messages 

F. Signaling, Delay-Request, and Delay-Response messages are sent as unicast messages 

Answer: B,F 

Q27. An support engineer has been tasked to protect an ISP infrastructure from the growing number of encrypted DDoS attacks. The solution should also validate the eBGP peering. Which solution accomplishes these goals? 

A. BGP FlowSpec 


C. BGP Route Dampening 



Answer: B 

Q28. Which are two major changes SyncE offers over traditional Ethernet to make it suitable for clock distribution? (Choose two.) 

A. SyncE introduces the concept of “Boundary Clocks” and “Transparent Clocks” improving network scalability and accuracy of clock synchronization. 

B. Industry standard that guarantee interoperability, since granular details, such as specific field values are specified. 

C. A mandated clock accuracy of 4.6ppm. 

D. The ESMC protocol for clock selection, distribution, management, traceability, and failover. 

E. High-priority synchronization packets so it can continually adjust its own oscillator. 

Answer: C,D 

Explanation: http://www.cisco.com/c/en/us/support/docs/optical/synchronous-optical-network-sonet/23718-timefaq-23718.html 


Q29. An engineer has just configured IOS-XR with out-of-band MPP. Which are the three results that will occur? (Choose three.) 

A. Management traffic to RP from all non-MPP interfaces is dropped 

B. RP/DRP Ethernet Interfaces are not default out-of-band interfaces. 

C. MPP configuration changes doesn’t affect active sessions established before the changes 

D. Interfaces configured for out-of-band MPP are still part of global routing/forwarding 

E. If MPP is disabled and a protocol is activated, all interfaces cannot pass traffic 

F. LPTS will provide rate limiting 

Answer: A,C,F 

Explanation: https://supportforums.cisco.com/document/93456/asr9000xr-local-packet-transport-services-lpts-copp 

Q30. A client has an MPLS inter-AS implementation that is required to have QoS deployed between ASBRs based on IP packet. At the same time, the client requires minimization of the routing configuration between ASBRs for better scalability. Which MPLS inter-AS option can achieve this goal? 

A. Option A 

B. Option B 

C. Option C 

D. Option AB 

Answer: D 

see more http://www.pdfcollection.net/400-201-pdf.html

[TRY FREE] BUY 400-201 Full version( pdf+software ):